This method requires the user to enter the user information on his/her mobile device then submit the registration request on the mobile device. The authorization server returns the result and the registrar program helps the user to save the registration key on the device. The user does not need to input the registration code manually.

Step 1. Choose Internet Connection type:

• Connect via ActiveSync with USB sync cable
• Connect via GPRS, CDMA 1X/2000, WCDMA(UMTS), HSDPA
• Connect via Wi-Fi or Wi-Max

Step 2. Launch Registrar program on your mobile device

Step 3. Enter information fields

Step 4. Submit the registration request

Step 5. Receive registration result

Step 6. Restart the device

Step 7. Troubleshootings

Step 1. Choose Internet Connection type:

You can select one of the connection type from the below types:

1-1 Connect via ActiveSync with USB sync cable

This method is the most simple way without extra charge. It requires your desktop PC(or notebook) has internet access connection and you connect your mobile device to the desktop PC via USB sync cable with Microsoft ActiveSync software.

1-2 Connect via GPRS, CDMA 1X/2000, WCDMA(UMTS), HSDPA

If your device has built-in wireless internet access module, you can do registration with GPRS, CDMA 1X/2000, WCDMA or HSDPA connection on your mobile phone without desktop PC. But you should configure these connections successfully first. For more details about how to configure, please refer your mobile network operator's user guide.

1-3 Connect via Wi-Fi or Wi-Max

If your device has built-in Wireless LAN and you can access Internet via the Wireless LAN. Then you can do registration with the Wireless LAN connection on your mobile phone without desktop PC. But you should configure the Wireless LAN connection successfully first.

Now, we can test if the mobile device can access internet by open a website in Pocket IE on the mobile device. If the browsing is successful, go next Step 2. Otherwise, please check the connection and configurations.

Step 2. Launch Registrar program on your mobile device

For Pocket PC/Pocket PC Phone (CE-Star for WM5 or CE-Star for PPC2003):

For Smartphone (CE-Star for Smartphone WM5):

Step 3. Enter information fields

Step 4. Submit the registration request

Step 5. Receive registration result

Step 6. Restart the device

Now tap the [OK] button, and the device will do soft-reset and restart.

Step 7. Troubleshootings

7-1 Invalid Serial Number or Order Number

The Serial Number is CE-Star product serial number, not your device hardware serial number. If you bought the retailed version or obtained the OEM bundled version, you will own one CE-Star serial number.

For technical reasons, we only process instant registration with Order Numbers after 2.8 R3 released currently.

7-2 Used serial number or order number by other customer

Perhaps other people used this serial number to register the product before you registered it. Or you used the different email address to register before. If you are sure that you owned the serial number, please contact our support team to help you.

7-3 Installed wrong version on your device or the serial number is not matched the version you installed

You may installed the incorrect or older version on your device and use the registrar program to do instant registration. Or you installed the retailed version onto your device and use the OEM version serial number to register. It is forbidden.

7-4 The OEM version does not support your device model

Perhaps you installed the OEM verison onto your device. While the OEM version was designed to limited running on specified device models only, and your model is not supported. Please remove this OEM version and install the retailed version.

Another cause is the OEM version you installed is a bit older version. You should download and install the latest OEM version onto your device and retry again.

7-5 You installed multiple copies on multiple devices

Commonly, we allow the user to register the product with one serial number/order number on up to two devices. If you try to register the product onto other devices, the server will reject the request and return the message. You should get new license(s) from Mobem.

7-6 My device has been hard-reset. Can I re-activate the software?

No problem, just re-register by the above steps with the original information.Be good luck!